1 / 7
Universal Phone Holder with Formulas for School — zdjęcie 1
1 / 7

Universal Phone Holder with Formulas for School

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for phone with educational formulas (czech) for school. It also has a hole for cable (original Apple Lightning).

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
314
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Universal Phone Holder with Formulas for School

Formulas are in Czech language

Final dimensions: 140 x 90 x 120 mm

Main part and holder are separable. 

Main part has a cable holder and the cable exits from back..

Things you need:

It uses magnets and plated pads for the formulas:

  • 8x Neodymium magnets 10 x 10 x 1 mm 
  • Neodymium magnets for formulas on the main part, thickness 1 mm
  • 4x Neodymium magnets 3 x 3 x 1 mm
  • Magnetic pad (or tape), width: 10 mm and thickness 1,5 mm
  • Plated pad (or tape), thickness 0,7 mm 

Most of the magnets were glued with Super Glue.

Assembly:

On formulas we used plated tapes. On the main part's front side (where formulas are) we used a neodymium magnets. The side phone holders use smaller magnets which attach to the glued plated tapes on the main part. Then glue the magnets on the main part's backside and on the formulas holder's leftside. In the formulas holder we used magnetic tapes to hold down formulas.

Printing:

Main parts:

  • 0.3 Layer
  • 5% Gyroid Infill
  • Custom supports

Formulas:

  • Two color print (with 0.3 layer only two layers)
  • 9 formulas (without text, resistance calculation, circle perimeter, pythagorean theorem, quadratic equation, energy calculation, circle content, speed calculation, forces calculation
  • 0.3 Layer 
  • 20% Gyroid Infill
  • Formula dimensions - 90 x 40 x 5 mm

Other parts:

  • 0.2 Layer
  • 100% Infill

Programs used: Blender (with plugin CAD Sketcher)

Printed on Prusa MK3S+

Created for 3Déčkuj Competition

Tagi