1 / 1
CP-140 Aurora / P-3 Orion Plane Geometric Art
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a geometric wall sculpture of a flying CP-140/P-3.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 214
- Wydruki
- 1
- Wyświetlenia
- 880
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (42)Powiązane
This model only uses 8g of filament and takes about 2.2 hours to print.
This model can be difficult to get a good first layer due to the thin structures. I have found that turning off the Optimize Wall Printing Order setting in Cura would make the thin wall structure print in a better order for good first layer adhesion. I also used a 0.12mm layer height and slow print speed which helped with the first layer as well.
Settings:
Layer Height: 0.12mm
Extrusion Width: 0.4mm
Shells: 3
Infill: 20%
Top/Bottom Layers: 4