Filament guides for use with dimensional lumber shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These attach to the top of a standard 2x8 or 2x10 shelf and overhang the front to guide your filament for an MMU or ERCF
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
These attach to the top of a standard 2x8 or 2x10 shelf with a single screw. The bottom hole is sized for a snug fit 4mm OD PTFE tube . Use a counter sink bit to chamfer the PTFE to make it easier to insert the filament.
There are 9 files total. Each one has a number to identify the spool. This is easily painted in slicer for MMU.
There is a small notch on the top in the center. This will line up with the notch in the Prusa lack enclosure v2 spool holders to keep things aligned. I have a remix of the spool holder as well with the same notch.