Filament guides for use with dimensional lumber shelves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These attach to the top of a standard 2x8 or 2x10 shelf and overhang the front to guide your filament for an MMU or ERCF
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
These attach to the top of a standard 2x8 or 2x10 shelf with a single screw. The bottom hole is sized for a snug fit 4mm OD PTFE tube . Use a counter sink bit to chamfer the PTFE to make it easier to insert the filament.
There are 9 files total. Each one has a number to identify the spool. This is easily painted in slicer for MMU.
There is a small notch on the top in the center. This will line up with the notch in the Prusa lack enclosure v2 spool holders to keep things aligned. I have a remix of the spool holder as well with the same notch.