1 / 1
LM8UU Bearing Removal Tool for Sovol SV06 (longer: 65mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer bearing removal tool for the double bearings of the Sovol SV06 Y-Axis
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 206
- Wydruki
- 2
- Wyświetlenia
- 1071
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (84)Powiązane
Remix of the excellent tool by @aldabest with a longer rod so it can remove both bearings on the Y-axis mounts on the Sovol SV06.
Print Settings
- Layer height 0.2mm
- Sturdier settings, e.g. 1.2mm walls and stronger top/bottoms, 20% infill
Usage (see this video)
- Remove the screws and washers on the bottom first
- Align the tool on the top so it touches the top bearing
- Hit it with a hammer until the bearings pop out on the bottom (there are two per side)