1 / 4
Air Hose Screamer - Air Hose Whistle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A whistle that plugs into a standard "industrial" style quick connect on an air hose.
- Ocena
- 4,8 / 5
- Polubienia
- 247
- Pobrania
- 1298
- Wydruki
- 21
- Wyświetlenia
- 5864
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 21) (Komentarze: 30)Remiksy (0)Kolekcje (261)Powiązane
A coworker gave me the idea a while back and I finally made it real.
It works, it is loud. Use at your own discretion. For best results try 75-90PSI, much over that it overloads the whistle and gets quieter again.
Printed at 0.25mm layer with a 0.4mm nozzle. The round base goes down for proper print orientation. Updated the model to reflect the correct print orientation. Use PLA or PETG.
See my Quad-Tone version here.