1 / 4
Air Hose Screamer - Air Hose Whistle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A whistle that plugs into a standard "industrial" style quick connect on an air hose.
- Rating
- 4.8 / 5
- Likes
- 247
- Downloads
- 1,298
- Makes
- 21
- Views
- 5,864
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A coworker gave me the idea a while back and I finally made it real.
It works, it is loud. Use at your own discretion. For best results try 75-90PSI, much over that it overloads the whistle and gets quieter again.
Printed at 0.25mm layer with a 0.4mm nozzle. The round base goes down for proper print orientation. Updated the model to reflect the correct print orientation. Use PLA or PETG.
See my Quad-Tone version here.