1 / 6
CR10S Lamp — zdjęcie 1
1 / 6

CR10S Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this lamp to go with my GPIO-controlled outlet box.

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
222
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I made this lamp to go with my GPIO-controlled outlet box. The lamp mounts to the top 2020 extrusion with two M5 X 10mm screws and T-nuts. The light socket is a candelabra base:

https://www.homedepot.com/p/Commercial-Electric-Keyless-Socket-2-Pack-81605/306197919

I use a 40W-equivalent LED lamp similar to this:

https://www.amazon.com/Feit-Electric-CTC40-927CA-FIL/dp/B07YT71BGW/

DON'T USE AN INCANDESCENT LAMP—YOU'LL MELT THE PLASTIC. The 3.3W lamp stays relatively cool.

This design also includes a press-in cover for the 2020 extrusion channels to conceal the light-duty line cord. I printed this in TPU.

Print Settings

Printer Brand:

Creality

Printer: 

CR-10S

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

20

Filament: Inland PLA/TPU Any

 

 

 

Category: 3D Printer Accessories

Tagi