CR10S Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this lamp to go with my GPIO-controlled outlet box.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I made this lamp to go with my GPIO-controlled outlet box. The lamp mounts to the top 2020 extrusion with two M5 X 10mm screws and T-nuts. The light socket is a candelabra base:
https://www.homedepot.com/p/Commercial-Electric-Keyless-Socket-2-Pack-81605/306197919
I use a 40W-equivalent LED lamp similar to this:
https://www.amazon.com/Feit-Electric-CTC40-927CA-FIL/dp/B07YT71BGW/
DON'T USE AN INCANDESCENT LAMP—YOU'LL MELT THE PLASTIC. The 3.3W lamp stays relatively cool.
This design also includes a press-in cover for the 2020 extrusion channels to conceal the light-duty line cord. I printed this in TPU.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Inland PLA/TPU Any
Category: 3D Printer Accessories