1 / 3
Voron 0 mounting parts for 5mm panels
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts for 5mm Panels on Voron 0
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 679
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
I mounted 5mm acrylic Panels (+1mm Foam and .7 VHB on some places). Lots of parts had to be adjusted. Here they are (:
If u attach (thread or glue) the screw on the upper part of the hinge and drill the lower part to 3mm, the door becomes detachable. I also added a screw-hole for fine adjustment.
Some parts need to be mirrored in the slicer, for the other side.
Why?
- detachable doors
- adjustable hinge
- less noise
- less heat loss through cheap thin panels
- a bit more stability