BTT PiTFT50 Case with articulating hinged arm for 3030 extrusions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinged arm and a case for the BTT PiTFT50 display I created for my RatRig V-Core 3.1.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 750
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a display case and an articulating hinged arm for the BTT PiTFT50 display. It is designed for the RatRig V-Core 3 printers but will work on any printer that uses 3030 extrusions.
The display angle can be adjusted using a friction joint. The hinge arm is primarily intended for moving the display out of the way when good access to the printer is desired.
The case front and back parts are remixes. The hinge is an original design.
All parts can be printed without supports. The hinge should be printed in place.
The included Fusion 360 design file include the whole V-Core 3.1 model and is pretty huge.