Wall Mounted Remote Control Holder - for Popular LED Lights / Light Strips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting Bracket for Popular LED Light Remote Control. Printed at 0.2 Layer Height. But should work fine in most setting
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 268
- Wydruki
- 5
- Wyświetlenia
- 796
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Remote Control Holder (Wall Mountable)
Designed for use with the popular little card type remote control, As supplied with a lot of LED Lights and Light Strips
I was certain I was going to loose my remote, so I made this holder to mount it always to hand. Used some "Number Plate Sticky Pads" to attach to wall.
Leaving access to the top row of buttons, You can use main functions without having to remove from holder.
Key Features:
Designed to allow access to main buttons on top row without removing from holder
Opening at bottom to allow you to push remote up out
With some sticky pads, it can be mounted on wall or below a desk / Shelf
Great Fit for this popular Little remote control
Check picture for Remote in question ( Remote Dimensions Approx : 85mm x 52mm x 7mm )