Duet Smart Effector E3D Revo Corner 4020 Part Cooling Blower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount and nozzle for a 4020 blower for a Duet Smart Effector
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Designed for using a 4020 blower fan with the Duet Smart Effector for corner mounting to avoid tower collisions.
The nozzle was printed in “ABS-like” transparent resin because it's the smoothest way I could print it. It's quite strong resin, I sprayed it with a clear coat to keep it from yellowing. You could print it with an FDM printer if it's dialed in with a PETG or ABS, I tried using Prusa Slicer to bisect it, but the internal fan mating surface came out messy. You can try different orientations but I printed it on it's larger flat side with supports.
You'll need various M3 screws and locknuts. I'd recommend one M3x25, M3x20, two M3x8 for the duet effector. I am using a 713maker SeeMeCNC effector mount but you could use the magnetic ball end M3's (if it's too thick I can make it shallower). It also has a cutout for the LEDS which still shine to the hotend.
You still have plenty of space to unscrew the nozzle with your fingers. You may need all 3 corners with fans, I'm using two for now. There shouldn't be any interference under the effector from the fans. The ducts clear the tip of the nozzle and line up with the bottom edge of the silicone ring. They provide quite a bit of laminar flow around the tip of the nozzle good for small parts.