Suzuki Sidekick Soft Top Trim (Fender)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compatible with the first gen suzuki sidekick. Only tested on my car. Mirror in slicer if you need the drivers side.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 211
- Wydruki
- 1
- Wyświetlenia
- 1492
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compatible with the first gen suzuki sidekick and geo tracker. Only tested on my car. Mirror in slicer if you need the drivers side. Profile has been modified to be stronger than OEM. Make sure to consider your material and infill. The soft top exerts a huge amount of force on this piece. My first print with low infill ABS wound up warping after 6 or 7 months in the Florida sun.
This is a large piece so you will have to cut it in your slicer and print in multiple parts. I used superglue to attach the pieces, acetone or an ABS slurry will also work.