Tronxy X5SA V6/Orbiter Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Hyper-Specific hotend mount
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 794
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
if you happen to have this hyper specific setup for your TronXY X5SA this is the mount for you.
E3D V6 Volcano
Creality CR Touch
Dual 5015 part cooling fans
3010 Heatsink fan
Sensorless homing.
I have it split into 3 parts, the 2 main parts should be printed out of ABS and the fan brace can be printed in a filament of your choosing
Parts are designed for m3 4mm heat set inserts
No parts should require supports, I printed them in the Voron standard:
4 Walls, 5 top/bottom 40% cubic infill, forced 0.4 line width.
you will need to adjust your nozzle min positions as well as your probe offset, the measured offsets in Cad are X +48.56mm Y +0.06mm but it is best practice to measure this as printing tolerances are built into the models.
There are 2 versions of the V6 Clamp 1 which has a mount for the 3010 fan and the other if you want to use the included duct that comes with the V6 hotend.
The Fan Brace is entirely optional, but helps with sensorless homing.