4X4 Post Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Post cap for a standard 4X4
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 186
- Wydruki
- 2
- Wyświetlenia
- 1130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to cap off the 4x4 posts that were used to build a bench as a gift for my mother. The pictures on this model are custom ones with her initials but the files I have included are slightly different. If you would like some other embossing, let me know and I'll try and upload it as time allows.
- Post cap with embossed peace signs
- Post cap with no embossing at all
They should fit any standard 4X4 (3.5"X3.5" true measurements) and we simply screwed them to the board. I recommend using PETG due to the likely outdoor exposure as PLA won't stand up.
Print Settings:
I used 0.3mm but lower layer height will have better looking embossing
3 perimeters
50% cubic infill
No supports required (inside won't be perfect but you won't see it once installed)