1 / 6
MK3S FS Cover for PTFE tube link to filament dryer — zdjęcie 1
1 / 6

MK3S FS Cover for PTFE tube link to filament dryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Using a Sunlu filadryer, I wanted that spool and filament were kept secure after printing until I am available to…

Ocena
5 / 5
Polubienia
9
Pobrania
61
Wydruki
1
Wyświetlenia
890
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Using a Sunlu filadryer, I wanted that spool and filament were kept secure after printing until I am available to store the spool properly.

So I designed 3 parts to adapt a PTFE tube to link the dryer to the FS Cover and keep the filament always out of humidity during printing. And you can let it in place after printing without fear of humidity.

The FS Cover is the MK3S, with a M10x1.5 and the PTFE is a standard tube (2mm in / 4mm out).

edit :  I have replaced the blue PTFE by a transparent one, this is much better to see the filament inside.

Tagi