MK3S FS Cover for PTFE tube link to filament dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Using a Sunlu filadryer, I wanted that spool and filament were kept secure after printing until I am available to…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 61
- Makes
- 1
- Views
- 891
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Using a Sunlu filadryer, I wanted that spool and filament were kept secure after printing until I am available to store the spool properly.
So I designed 3 parts to adapt a PTFE tube to link the dryer to the FS Cover and keep the filament always out of humidity during printing. And you can let it in place after printing without fear of humidity.
The FS Cover is the MK3S, with a M10x1.5 and the PTFE is a standard tube (2mm in / 4mm out).
edit : I have replaced the blue PTFE by a transparent one, this is much better to see the filament inside.