1 / 3
Simple Dome to hide wires or a hole in the wall — zdjęcie 1
1 / 3

Simple Dome to hide wires or a hole in the wall

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dimensions: Outer Diameter: 64mm Inner Diameter: 44mm Height: 90mm Wall Thickness: 0,5mm

Ocena
0 / 5
Polubienia
10
Pobrania
34
Wydruki
0
Wyświetlenia
235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple dome to hide cables or a hole in the wall. Very low material consumption. I used double-sided adhesive tape to fix it to the wall.

Printed in PLA without supports.

Dimensions: 

Outer Diameter: 64mm  
Inner Diameter: 44mm  
Height: 90mm   
Wall Thickness: 0,5mm

Tagi