FX Wildcat speed loader - See video
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A speed loader for your FX Wildcat airgun that doubles as a pellet storage
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 938
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A very effective and easy to use speed loader, load 32 pellets in about 30 seconds
Works with Wildcat MK1 and other FX airguns with the same magazines
Instructions:
- Place the speed loader on a table
- Place your mags
- Feed the speed loader approximately 150 pellets in ”the deep end”
- Lift the speed loader and the mags get flush with the bottom
- Shake carefully until you have one pellet in each hole of your mag
- Place speed loader on a table to raise the mags
- Do a final adjustment of the pellets and push them down the mag
Due to gravity the pellets will want to enter the mag with the heavier nose first. Works best with round nose pellets but other pellets works good too
If you only have 3 or less magazines you can use the blind plugs to cover those holes
Hardware needed
M3x8 cap head screw - 6 PCS
Print with your favorite filament
I printed with 0.2mm layers and no support needed