85C1-A Ammeter Case -- for K40 laser or other applications
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for 85C1-A Ammeter
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I decided for the K40 to mount the 85C1-A analogue ammeter externally, and I needed a case for it. My specific purpose was for the laser, but this will work if you just need an ammeter case for something.
This case comes in two parts: a base, which mounts to the laser (there are four bolt holes), and a top that holds the ammeter.
The ammeter bolts into the top (it's a little tricky for clearance to get it bolted in, but some needle-nose pliers will work), and then the top bolts onto the base.
All bolt holes are for m3 bolts.
There's a hole in the base to allow for wires, or, if you don't want to drill an extra hole in your project, there are holes on either side at the base that you can run wires through.