1 / 3
85C1-A Ammeter Case -- for K40 laser or other applications — image 1
1 / 3

85C1-A Ammeter Case -- for K40 laser or other applications

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Case for 85C1-A Ammeter

Rating
0 / 5
Likes
3
Downloads
50
Makes
0
Views
341
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I decided for the K40 to mount the 85C1-A analogue ammeter externally, and I needed a case for it. My specific purpose was for the laser, but this will work if you just need an ammeter case for something.

This case comes in two parts: a base, which mounts to the laser (there are four bolt holes), and a top that holds the ammeter.

The ammeter bolts into the top (it's a little tricky for clearance to get it bolted in, but some needle-nose pliers will work), and then the top bolts onto the base.

All bolt holes are for m3 bolts.

There's a hole in the base to allow for wires, or, if you don't want to drill an extra hole in your project, there are holes on either side at the base that you can run wires through.

Tags