Edge mount for 50x50 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used in PC case but could be used pretty much anywhere
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
OK, I really have no idea if this could be useful to anyone else but whatif…
Origin story:
Maker of my mainboard was so incredibly bright that they made a small sandwich of a chipset, small plastic heat spreader/NVMe mount, M.2 NMVe drive and alu heatsink. What could go wrong, right? Well, they stopped making that board less than a year after release…Anyway, no matter how large heatsink or even fan you slap on that NVMe drive, it always works as a heat spreader for the chipset, being pushed over 70C under heavy load or in long gaming sessions. Me no likey.
So, the quick test proved that to actively cool the underside of the mainboard with ultrasilent 50x50 fan makes wonders here, wonders like keeping the NVMe on the other side nicely around 50C. Sure, I could just slap the fan there with a blob from a glue gun but that not why I got a 3d printer. And I like it when things are pretty.
So, here we go, it can be used to mount to any edge up to 4mm both thickness or folded rim, you need 6mm allen to tighten it and ASA should be the right material. There are modifiers present, so you're gonna need PrusaSlicer.