1 / 3
Edge mount for 50x50 fan — image 1
1 / 3

Edge mount for 50x50 fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.44 – €1.76 net (excluding VAT)

For file: fan_frame v3_0.15mm_ASA_MINI_1h33m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.60 excluding VAT (range midpoint).

Weight reported by the author
10 g
Print time reported by the author
1.55 hr
Source material
ASA
Estimate material
ASA
Estimate printer
Bambu Lab X1 Carbon - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Used in PC case but could be used pretty much anywhere

Rating
0 / 5
Likes
2
Downloads
16
Makes
0
Views
176
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

OK, I really have no idea if this could be useful to anyone else but whatif…

Origin story:

Maker of my mainboard was so incredibly bright that they made a small sandwich of a chipset, small plastic heat spreader/NVMe mount, M.2 NMVe drive and alu heatsink. What could go wrong, right? Well, they stopped making that board less than a year after release…Anyway, no matter how large heatsink or even fan you slap on that NVMe drive, it always works as a heat spreader for the chipset, being pushed over 70C under heavy load or in long gaming sessions. Me no likey. 

So, the quick test proved that to actively cool the underside of the mainboard with ultrasilent 50x50 fan makes wonders here, wonders like keeping the NVMe on the other side nicely around 50C. Sure, I could just slap the fan there with a blob from a glue gun but that not why I got a 3d printer. And I like it when things are pretty.

So, here we go, it can be used to mount to any edge up to 4mm both thickness or folded rim, you need 6mm allen to tighten it and ASA should be the right material. There are modifiers present, so you're gonna need PrusaSlicer.

Tags