17mm Hollow Standoffs for YuRobot Fan Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
17mm passthrough standoffs for RPi cooling fan board
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
While attempting to mount a YuRobot cooling fan expansion board for my Raspberry Pi 4B I discovered the included brass standoffs were designed only to accept screws from both sides, limiting it's application. The brass standoffs were of a non-standard length as well, meaning commercially available standoff kits would not be of use.
Thus, I created four 17mm hollow standoffs that permitted me to use four 25mm M2.5 screws to mount and support the board properly to the Raspberry Pi when already mounted to a case, or in this case the official 7" touchscreen.