1 / 3
17mm Hollow Standoffs for YuRobot Fan Kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
17mm passthrough standoffs for RPi cooling fan board
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
While attempting to mount a YuRobot cooling fan expansion board for my Raspberry Pi 4B I discovered the included brass standoffs were designed only to accept screws from both sides, limiting it's application. The brass standoffs were of a non-standard length as well, meaning commercially available standoff kits would not be of use.
Thus, I created four 17mm hollow standoffs that permitted me to use four 25mm M2.5 screws to mount and support the board properly to the Raspberry Pi when already mounted to a case, or in this case the official 7" touchscreen.