1 / 2
Mandalorian Mythosaur Hitch Cover for 2" Receiver — zdjęcie 1
1 / 2

Mandalorian Mythosaur Hitch Cover for 2" Receiver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mandalorian Mythosaur Hitch Cover for 2" Receiver

Ocena
0 / 5
Polubienia
16
Pobrania
47
Wydruki
0
Wyświetlenia
410
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mandalorian Mythosaur Hitch Cover for 2" Receiver.

Designed to fit 2" receivers.  Was specifically tested and fits perfectly inside the hitch on my Super Duty that has a 2.5" to 2" adapter it.

Printed in PETG use Bambu X1C with AMS

Recommended settings:

Print inverted, with Mythosaur face down.

Minimal supports used under face from build plate only.  No other supports needed.

Used Basic PLA as the support material and interface and detached very easily after print completed.

Top Shell: 4 Layers

Bottoms Shell: 5 Layers

Sparse Infill Density: 35%

Wall Loops: 4

 

Uploaded both the base STL and the my 3mf project file with it prepainted and recommended settings.

FYI: Ignore the ‘2-tone’ color square base.  Was low on black so printed the stop you don't see inside with extra clear material I had available.

Tagi