1 / 2
Mandalorian Mythosaur Hitch Cover for 2" Receiver — image 1
1 / 2

Mandalorian Mythosaur Hitch Cover for 2" Receiver

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mandalorian Mythosaur Hitch Cover for 2" Receiver

Rating
0 / 5
Likes
16
Downloads
47
Makes
0
Views
411
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Mandalorian Mythosaur Hitch Cover for 2" Receiver.

Designed to fit 2" receivers.  Was specifically tested and fits perfectly inside the hitch on my Super Duty that has a 2.5" to 2" adapter it.

Printed in PETG use Bambu X1C with AMS

Recommended settings:

Print inverted, with Mythosaur face down.

Minimal supports used under face from build plate only.  No other supports needed.

Used Basic PLA as the support material and interface and detached very easily after print completed.

Top Shell: 4 Layers

Bottoms Shell: 5 Layers

Sparse Infill Density: 35%

Wall Loops: 4

 

Uploaded both the base STL and the my 3mf project file with it prepainted and recommended settings.

FYI: Ignore the ‘2-tone’ color square base.  Was low on black so printed the stop you don't see inside with extra clear material I had available.

Tags