Bambulabs X1C PTFE-Bracket - Extended Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version holds the PTFE-Tube in a horizontal position.
- Ocena
- 4,344 / 5
- Polubienia
- 294
- Pobrania
- 2489
- Wydruki
- 39
- Wyświetlenia
- 9856
- Oceny
- 32
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed (https://www.printables.com/de/model/365027-bambulab-top-glass-riser-4-cob-led-remix-with-led-).
I'm not sure if this is really a problem, but with a little modification I was able to prevent this. As you can see at the pictures, my version has a little longer arm, so that it can keep the PTFE-Tube horizontal. And: it is easyer to print, I didn't need a brim.
EDIT: Some users reported an issue that the bracket crashes to the upper front of the frame when homing the printhead. I am using the part now for more than a year and never had any problems. But please check this when using the part for the first time. Use at your own risk!