Fan duct Geeetech Prusa I3 Pro B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed another fan duct before, but this didn't work as good, so I did this and this is awesome. Designed for 40…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed another fan duct before, but this didn't work as good, so I did this and this is awesome. Designed for 40 mm fan (files without diameter in name) and 50 mm fan.
Update 2017-07-22: New version (v4) for better cooling results. At the inside I added some baffles and a cylinder under the fan for better air flow. I will add a version (v5) without the cylinder, because if you use a fan with other plate diameters it will harm the air flow.
Version v6 is with an extra outlet at the middle and extra baffles.
Update 2018-03-04: added 50 mm fan version of v5 & v6. Could not test the 50 mm version as I don't have a 50 mm fan.
Please leave a comment if you tested the 50 mm version and it fits!
Hope you like it. If you have any questions, leave a comment.
Print Settings
Printer:
Geeetech Prusa I3 Pro B
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
100 %
Notes:
I printed this with support at the inside of the fan hole and also where the slot is for the screws to mount it.
Category: 3D Printer Parts