OpenRC F1 Front Spoiler flexible mount and stronger spoiler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tried to improved the original design of the front spoiler from barspin's OpenRC F1. The spoiler is a little bit…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Tried to improved the original design of the front spoiler from barspin's OpenRC F1.
The spoiler is a little bit stronger at the point where it often breaks when you hit something with the spoiler.
Additional I tried to change the mount of the spoiler with a flexible part, so the spoiler can move during an impact instead of breaking directly.
Up to now it worked good for me, but you should prevent hard hits anyway :)
Part 1 can be printed in PLA and part 2 in a flexible material (I used TPU from FormFutura).
If you have any questions or improvements I could do, please leave a comment.
RemixChallenge
Print Settings
Printer:
Geeetech Prusa I3 Pro B
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
10 %
Notes:
For the spoiler you need support material, for the mounting part you can print it flat on the print bed without any support
Category: R/C Vehicles