Estes 18mm Model Rocket - "When Pigs Fly..."
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Everyone has been told "yeah... when pigs fly" at least once in their lives. Time to make it happen.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
IfDisclaimer: I have designed a few rockets. Some work. Some… don't. This one is a more risky/non traditional design, so launch entirely at your own risk.
Everyone has been told “yeah, when pigs fly” at one point.
I figured it was time to make that happen.
I've only ever made symmetrical rockets, but having a smoother back and a larger face with ears… didn't bode well.
So I added small fins at the top at an opposing angle to induce a “stability corkscrew”
I also added a tail over the pigs a…. “vent hole” to induce some drag on that side.
Why the vent hole? The estes motors pop a little charge to blow out the parachute. This rocket is light enough it should needed it.
There's a decent chance it'll blow up anyway as the hole is only 5mm wide… but hey, that's part of the fun!
Printing is easy, just punch through a sacraficial support layer in the middle of the rocket with a screwdriver or some other 10cm-ish long object.
Explainer video:
If you print and launch this rocket, please post your make!!!