Prusa Style hotend for PrinterMods MDD + BMG + E3d v6 + 5015 + bl Touch + X-axis linear rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 piece hotend / fan setup for Creality style printers that have the PrinterMods MDD plate, and x-axis linear rail.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
4 piece hotend / fan setup for Creality style printers that have the PrinterMods MDD plate, and x-axis linear rail. Uses Assortment of M3 hardware, and needs several m3 nuts. Uses Prusa Mk3 fan ducts.
Please leave a comment if you find an issue, or would like to request a change.
Changelog:
Issue log:
11/9/2020 - Bl Touch too close to Fan duct - Fix coming soon.
Print instructions
Print All Parts except the fan duct in PETG, ASA or a stiff nylon, at 4 walls ( with a .4mm nozzle) and at least 20% infill.
Print the Fan duct at 100% infill with ASA, ABS, PC, or Nylon.
Make sure to use a long m3 screw to press in the nuts.
Once you're done with assembly, remember to post a picture, and share your print!
**Detailed Assembly instructions coming soon.