1 / 8
Skilhunt HB3 Dual Mount for 2x Zebralight H600 Mk IV
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual headband mount for your Zebralight H600 headlamps!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can purchase this item from me here!
I also sell the Skilhunt HB3 headband here!
This dual Zebralight holder snaps right into the HB3 headband!
There's a ridge in the design that matches up with the headband grooves in the Zebralight headlamp to prevent side-to-side motion. The H600s are mounted opposing each other so that the heads do not block each other's light.
I print these on a 0.4mm printer using PETG. 0 infill, 6 perimeters.