1 / 2
Bottle Cap - Bottle Opener Holder - Fridge Magnet — zdjęcie 1
1 / 2

Bottle Cap - Bottle Opener Holder - Fridge Magnet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

What better way to hang your bottle opener's then by hanging them off a Bottle Cap!

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Why not hang your favorite bottle opener off of a bottle cap?  Designed to fit two rectangular magnets, a 45 x 10 x 3 and a 27 x 10 x 3.  I used these and broke them into shorter lengths to fit: https://www.amazon.com/gp/product/B082Q1MR6M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Smaller magnets are fine for lighter weight bottle openers, currently mine is holding a large grill spatula.

If your fridge or metal surface is too slippery, a TPU base is included too.  It can be printed first in a multi-material print, and swap to PLA and insert the magnets in the middle of the print.  Or print the base separately and glue it on after.

 

No support needed if printed vertical, but a good raft and good first layer adhesion is key.  If laying flat, supports are needed.

Adjust infill and walls based on how heavy your bottle opener is.

Tagi