Bottle Cap - Bottle Opener Holder - Fridge Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
What better way to hang your bottle opener's then by hanging them off a Bottle Cap!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Why not hang your favorite bottle opener off of a bottle cap? Designed to fit two rectangular magnets, a 45 x 10 x 3 and a 27 x 10 x 3. I used these and broke them into shorter lengths to fit: https://www.amazon.com/gp/product/B082Q1MR6M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Smaller magnets are fine for lighter weight bottle openers, currently mine is holding a large grill spatula.
If your fridge or metal surface is too slippery, a TPU base is included too. It can be printed first in a multi-material print, and swap to PLA and insert the magnets in the middle of the print. Or print the base separately and glue it on after.
No support needed if printed vertical, but a good raft and good first layer adhesion is key. If laying flat, supports are needed.
Adjust infill and walls based on how heavy your bottle opener is.