RatRig V-Core 3.1 300 Electronic Side Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RatRig V-Core 3.1 300 Electronic Side Panels with support for IEC and Fans (optional) (Without Enclousure)
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 791
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
RatRig V-Core 3.1 300 Electronic Side Panels with support for IEC and Fans (optional) (Without Enclousure)
This model is designed to fit a V-Core 3.1 300, not tested for V-Core 3 but probably will fit. Also avoid to use with Enclousure. On both sides you have support to use bowden clamp and new spool holder.
This panels are:
- Electronic Right Panel: include hole to put an IEC connector and back cover, you have the full size to print at once or lower and upper parts for smaller printer area.
- Electronic Left Panel: there are 2 versions, with support for 4010 fans or without, you can also mix parts to put only one fan. you have the full size to print at once or lower and upper parts for smaller printer area.
IEC back cover from @MichaelWhitley : https://www.printables.com/model/82811-back-cover-for-iec-320-power-socket-ratrig
I will make a version to fit with enclousure side panels, also for 200, 400 and 500 but feel free to use F360 file to customize.