1 / 4
Wheels/Rollers/Kolečka for SAMLA 301.029.74
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wheels for 56x39x28cm size SAMLA box from Ikea.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 175
- Wydruki
- 7
- Wyświetlenia
- 2506
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 7) (Komentarze: 12)Remiksy (0)Kolekcje (112)Powiązane
Simple wheels for 56x39x28cm size SAMLA box from Ikea. None solution from thingiverse worked for me, they are probably for different size or version of the box.
So this was build from scratch in Tinkercad (feel free to edit: https://www.tinkercad.com/things/k1UTDgC20vW).
This box fits nicely under LACK table, so I store filaments there.
Print instructions
- printed from PETG (Spectrum - Lion Orange) at 0.3mm layerheight
- seam position set to random for preventing a blob on wheels (if seam is aligned, wheels are not perfectly circular)
- no supports needed
- there is only one body so you have to multiply it by four and two of them mirror to get left and right version.
- roughly 2cm pieces of filament are used as axis (this was nice idea from manticus at thing:2069387, thank you)
- still not sure about hole size in wheels, drill them with 2mm bit if needed
- securing to the box is probably not necessary, but feel free to use a few drops of hot glue