Magnetic UFO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UFO with a magnetic beam.
- Ocena
- 4,952 / 5
- Polubienia
- 2851
- Pobrania
- 4687
- Wydruki
- 78
- Wyświetlenia
- 40 589
- Oceny
- 63
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview.
I made a scene that shows a typical mainstream UFO which try to kidnap a cow :) This concept in nice way shows “magic” magnetic force that can make things seems to levitate.
Watch this model on my youtube
Instructions.
After print you have to glue everything with superglue except the little man that should fit without glue.
In the UFO you have to put magnets. You don't need to glue them, just put them into hole and screw the cap, the more magnets the better. The hole has diameter 13 mm, so you can use magnet up to 12 mm diameter without trouble.
In the cow you have to make a small tail with a wire from a paper clip. This is enough to make some “levitation” effect. If you want you can attach to clip a magnet or glue magnet to the cow body. It should makes better effect of levitation.
You can use the base without the little man. There is a small hole to hook things you want, in my case I stuck some paperclips in there.
Have fun :)