Spyro dragon egg gift box (MMU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 color multimaterial large dragon egg gift box from computer game Spyro. Holds together using magnets.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 1903
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I made this model as plush Spyro gift box for my daughter. Looks are inspired by eggs from Spyro™ Reignited Trilogy.
Print instructions
Top part of egg needs to be printed upside down with supports. Magnets needs to be inserted during the print. Be careful, as standard neodyme magnets starts decaying when heated above 80°C, it is better to use some temperature resistant magnets like SmCo.
If you print on Prusa Mk2/3/4, the extruder cable bundle will start coliding with model, so you need to make sure to keep it out of way somehow or it will ruin your print. I used rubber band to tie it to MMU (see attached photo).
Attached gcodes are bit old, bottom part uses just 2 colors in slots 1 and 2. Top part uses same colors and also soluble supports in slot 5
Bill of materials
- 6× cylindrical magnet, ø 10 mm, height 4 mm
Customization
Magnet size can be adjusted in scad source using variables mag_d and mag_h (do not forget to include some tolerance).