Spyro dragon egg gift box (MMU)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€34.55 – €42.22 net (excluding VAT)
For file: spyro-egg-b-v01-pla-200uv-mmu12.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €38.39 excluding VAT (range midpoint).
- Weight reported by the author
- 414 g
- Print time reported by the author
- 41.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
2 color multimaterial large dragon egg gift box from computer game Spyro. Holds together using magnets.
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 83
- Makes
- 0
- Views
- 1,908
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
I made this model as plush Spyro gift box for my daughter. Looks are inspired by eggs from Spyro™ Reignited Trilogy.
Print instructions
Top part of egg needs to be printed upside down with supports. Magnets needs to be inserted during the print. Be careful, as standard neodyme magnets starts decaying when heated above 80°C, it is better to use some temperature resistant magnets like SmCo.
If you print on Prusa Mk2/3/4, the extruder cable bundle will start coliding with model, so you need to make sure to keep it out of way somehow or it will ruin your print. I used rubber band to tie it to MMU (see attached photo).
Attached gcodes are bit old, bottom part uses just 2 colors in slots 1 and 2. Top part uses same colors and also soluble supports in slot 5
Bill of materials
- 6× cylindrical magnet, ø 10 mm, height 4 mm
Customization
Magnet size can be adjusted in scad source using variables mag_d and mag_h (do not forget to include some tolerance).