30cc / 55cc tube dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Manually operated precision 3 part dispenser for 30cc and 55cc tubes/barrels.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Manually operated precision 3 part dispenser for 30cc and 55cc tubes/barrels. Does't require supports to print.
Recommended layer height 0.2mm or below. 3-5mm of brim recommended.
Takes around 4h15m to print with previously mentioned settings.
Note when placing thumbscrew.stl on bed and assembling the unit because the design features buttress thread. Position flat side of the buttress thread facing away from the attached tube.
Tube twists and locks into place, so no need to undo the whole screw.
Link to the 30 / 55cc tube stand- https://www.thingiverse.com/thing:4797599 https://www.prusaprinters.org/prints/60714-30cc-55cc-tube-stand
Feel free to modify, share or sell in any format.
Inspired by user Perinski "Solder paste and flux Dispenser"- https://www.thingiverse.com/thing:3148234
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
200
Infill:
15
Filament: Prusament PET-G Jet Black
Notes:
PETG, PLA, ABS/ASA all suitable. Brim recommended.
Category: Hand Tools