Magnetic bowles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shells that act magnetically on the inside as well as on the Base, reducing the chance of losing a Screw while tinkering
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Magnetic shells that act magnetically on the inside as well as on the base and reduce the chance of losing a screw when tinkering. All printed in Place.
Previous variants are two flats that are 70mm in diameter and 28mm in height. And 2 heights that are 70mm in diameter and 40mm high. Flat as well as high variants have a Version with a fourfold division for sorting. More variants are planned, suggestions are welcome...
All you need are 9 Magnets that are 8mmx3mm. However, the shells can also be printed without Magnets. In addition, they are stackable.
Printed on: Original MK3S+
Filament: Das Filament - (PLA Schwarz / PETG Beige / PETG Alusilber) - Prusament PETG Prusa Orange