Ender 3 S1 bottom cable holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for cable coming out of the bottom of the printer.
- Ocena
- 5 / 5
- Polubienia
- 230
- Pobrania
- 1227
- Wydruki
- 20
- Wyświetlenia
- 4918
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The cable holder, which exits from the bottom of the printer, is designed for those who do not want the cable to lie on the desk.
IMPORTANT!Print on the side with support as I showed in the last photo otherwise it will crack on the layers. |
The cable holder requires support during printing, I recommend you to set it yourself.
To attach the cable support you will need the screw and nut that are left over from the printer assembly.
The cable support should be adjusted so that it does not interfere with the X-axis arm in its lowest position.
The cable holder attaches to the bracket and is very tightly fitted, if you have trouble attaching it increase the scale a bit or write me I will make a version with tighter tolerances.