1 / 4
VAG Fuel Cap Latch (Audi VW Skoda Seat) — zdjęcie 1
1 / 4

VAG Fuel Cap Latch (Audi VW Skoda Seat)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement latch for the fuel/gas cap for VAG group cars.

Ocena
5 / 5
Polubienia
35
Pobrania
169
Wydruki
2
Wyświetlenia
1224
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A replacement latch for the fuel/gas cap for VAG group cars, as with age the original rubber parts breaks easily. While the model by Sponge is good, the original system is better as it allows for easier rotation while screwing and unscrewing for refuelling. This is a replacement part for it. 

In case, you have lost the original ring to which it attaches, I have also created the model for it [LINK].

As the original system is held together with two pins, if you have lost them, you can always use a cut toothpick (see pictures). If you have the original pins, the holes on the print may need to be cleaned to fit properly.

Print settings:

  • TPU/Flex filament;
  • 15% infill;
  • 0.1 Detail on Prusa Mini;
  • Fiberlogy Fiberflex preset;
  • I prefer 3 perimeters, but 2 will work fine.

Happy printing!

 

Tagi