Parametric Shelf for angled walls (slanted roof for example)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small shelf brace and plank that can be adjusted to fit a 45o angle wall . Parametric - Fusion 360. Joinable.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 581
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
It's a brace and its shelf that is build to fit a slanted wall. In my case, it's an old house with gables and I want shelf hanging from the gables.
Note that by the nature of this, there's not much room on the shelf :)
The file "Angled Shelve parametric.f3d" is a fusion 360 file.
- Go to solid > Modify > Change Parameters (see image)
- You can change several parameters:
- The angle of the wall
- The width of the shelf
- The depth of the shelf
- The print tolerance for fitting the parts into each other (0.21 by default. 0.3 is loose, 0.1 is very tight - possibly unfittable) - depends on your printers, test this first)
- The size of the holes for screws
- Stay withing the parameters size in the details. You can't make this a 90° shelf for example.
You can join multiple ones together. Just push the shelf only half way the bracket, and put another shelf on the other side (it will be the bridge in the middle). There's a little tab that you can print and insert between the two shelves in the little side holes. If your parts fits too loose, you can always drop a bit of glue gun.