1 / 8
Parametric Shelf for angled walls (slanted roof for example) — image 1
1 / 8

Parametric Shelf for angled walls (slanted roof for example)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small shelf brace and plank that can be adjusted to fit a 45o angle wall . Parametric - Fusion 360. Joinable.

Rating
0 / 5
Likes
12
Downloads
73
Makes
0
Views
577
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution

It's a brace and its shelf that is build to fit a slanted wall.  In my case, it's an old house with gables and I want shelf hanging from the gables.

Note that by the nature of this, there's not much room on the shelf :)

The file "Angled Shelve parametric.f3d" is a fusion 360 file.

  • Go to solid > Modify > Change Parameters (see image)
  • You can change several parameters:
    • The angle of the wall
    • The width of the shelf
    • The depth of the shelf
    • The print tolerance for fitting the parts into each other (0.21 by default.  0.3 is loose, 0.1 is very tight - possibly unfittable) - depends on your printers, test this first)
    • The size of the holes for screws
  • Stay withing the parameters size in the details.  You can't make this a 90° shelf for example.

You can join multiple ones together.  Just push the shelf only half way the bracket, and put another shelf on the other side (it will be the bridge in the middle).  There's a little tab that you can print and insert between the two shelves in the little side holes.  If your parts fits too loose, you can always drop a bit of glue gun.

 

Tags