Counting matching models…
I wanted a bin where the label was easy to read even from the front. So I made these. Apart from the fact that the design of the label lip prevents other units from being stacked on top of the bins, the dimensions of the bins are in…
This design is a streamlined, slanted 5 segmented container(4 back and 1 large front), tailored for the Ikea Skadis board. The dimensions are 230mm in length by 115mm in width, with a height of 120mm sloping down to 50mm at the front. the…
Slanted Pen and Sticky Note Holder Keep your desk organized and stylish with this 3D-printed Slanted Pen and Sticky Note Holder. Featuring a minimalist design, it combines a slanted pen cup and a holder for sticky notes, perfect for any…
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
An easy to print replacement PEI nozzle cleaning plate holder for the Qidi Plus 4 Introduction The stock PEI holder allows the nozzle to collide heavily with the edge of the PEI plate. Most of the times the printer handles this okay, but…
This is slanted grip piece for the X-Shot Pro Fury X that attached via the rail on the bottom. It should be just slide-on friction fit, but the tolerances are funky, so I've also provided the .step file in case you need to adjust it.…
Toploadable Magazine holders for Mini Slanted Talon Mag (Nightingale magazine). Belt and MOLLE versions are provided. Key dimensions are based on Flygonial's original design. At the time of posting, the belt version has not been tested…
This design is a streamlined, slanted 8 segmented container tailored for the Ikea Skadis board. The dimensions are 230mm in length by 60mm in width, with a height of 90mm sloping down to 50mm at the front. My initial prototype featured…
A slanted 1/24 or 1/25 scale car display stand, to better display the undercarriage. You could put a mirror underneath as well for even better viewing. Category: Vehicles
Remix of @upwdesign's, @flygonial's, etc designs because I really love the "open" remix for the full-size talons.
Ever tried finding a lamp for a room with slanted ceilings (Dachschrägen)? Exactly — impossible! 😅 So i made one :) You will need: an E14 socket, an E14 bulb, four M5 heat-set inserts, four 5 mm M5 flat-head bolts electrical cable Angle -…
This holder holds 2 straight cutters at an angle so so that it fits in various drawers.
Spray Paint holder for the hex wall organizer. HSW. Slanted to allow for stacking. Print with supports.
This riser, is base on the original but separates the frame parts from the riser parts, so that it can be printed without supports and be assembled after printing. This means there are significantly more parts. to print this: -open in…
Designed a small plant stand to sit underneath my plant and on my dining table. Shouldn't need any support. I plan on printing the legs in two colors. Category: Outdoor & Garden
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
I wanted under desk mount for my Motu M2 audio interface. There are quite a few designs around, but most of them are not very precisely measured, so I designed my own. I have made it 30° to be more ergonomic, and the meters can be seen…
a simple usb storarge brick. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: .02 Infill: 20 Filament: any pla any Notes: Just a simple USB storage brick. Category: Computer
The tensioning shim snaps on/off and is retained when the mag holder is empty. Without modification, mags can be held in place if sayas are assembled tightly enough. Advise cutting an additional groove in smaller mags to match the…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
*** SEE Edit Below *** I wanted something different from designs I have seen to hold my sockets in my toolbox. So I made this slanted socket rack. It fits nicely in the shallow drawers of my toolbox. And the slanted design makes it easy…
I needed a Box that would fit Trading cards that are in standard top loaders, but would also allow me to flip through them as needed. Its pretty basic, I used Standard PLA at 20% Infill.
I printed Stew's version and noticed the holes didn't quite line up to the stock Plus4 purge bucket assembly. The printed part was also quite wobbly and had very loose clearances with a well tuned machine. I noticed a lot of the printed…
Needed vents for my power and networks box for my outside cameras as the equipment got to hot in the waterproof sealed boxes. Made the fan cover and rectangular vent with slanted fins to still keep water out. The first design with thin…
Geometric Slanted Diamonds Style Pot. A star shaped pot with a geometric slanted diamond effect on the sides. The pot is designed to be a simple and easy print with no supports required. This pot can be used as a plant pot, flower pot,…
ARCIVE presents a refined evolution of the remote stand, defined by a curved upper surface that merges seamlessly into a softened, continuous silhouette . The overall geometry retains its signature slanted profile , intentionally angled…
Overview This is my first attempt at designing and printing the illusion of a woven basket by using alternating and overlapping patterned sweeps in two directions. I was pretty conservative with this design, as can be seen from the solid…
After using this (excellent!!) Nespresso capsule dispenser for months and loving it, I found myself wishing a slightly different “entry point” for the sleeves at the top of the dispenser.: When opening the sleeves, there's usually 2 small…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
This model is compatible with the lego system.
Krawattenhalter mit schräg angeordneten Haken. Dadurch lassen sich die Muster und Farben der einzelnen Krawatten leichter überblicken. Für sechs oder 10 Krawatten. Die Ausführung für 10 Krawatten paßt bei einem Prusa MK4 diagonal auf das…
I needed a good way to store a lot of pencils on my desk, but wanted it to not take up too much space. This model is designed to sit under a monitor. The 45 degree slant allows for easy access to pencils. The cutouts save time and…
Really liked the Gridfinity silverware holders from breese-2 . I have some Ikea small drawers and they all have a slanted edge that I wanted to utilize to maximize space. These drawers fit the gridfinity grid with just a tiny bit of…
This is a slanted deckbox I made for the cards in the boardgame Clank! and the Sunken treasures expansion. It fits all the adventure cards and the market cards. I keep the 4 starter decks in separate baggies so they are not made to fit in…
Need to join three beams to form the corners of a cube/frame/enclosure? This model is designed for 22mmx22mm square profiles, but can be scaled up or down according to your needs. It will hold them in a reasonably close to 90 degrees…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
Slanted penholder part for the ‘Bauhaus tray’ Remix designed by R_vdk, Credits to the original creator Printtime 26h 55min Weight 186.20 g Dimensions 170 x 114 x 40mm Application / Functions I needed a good desk organizer for my working…
Because it looks like it needs some air-cooling.
The Pickup Rings are designed so the Pickup is parallel to the strings, when the Guitar's Top isn't. The Higher Frame goes from 8.3mm-7.4mm The Lower Frame goes from 6.7mm-5.8mm I printed them in Matte Black “Extrudr PLA NX2” with 0.05mm…
The Honest Shelf // Vol. 78 🖋 Upgrade Your Space with the Perfect Slanted Organizer. A versatile, ribbed container designed for those who value clean lines and effortless organization. If You are interested of my other Designs, feel free…
I love my Flashforge Creator Pro except for one ergonomic problem, when I stand next to it I simply cannot see the display because it is too low and is vertical. I need either to step back or bend down. Not anymore. This design provide a…
A simple Slanted Threaded pen holder printed in two pieces and threaded together :) Printed in PLA at 0.15 layer height just fine
A functional multi-compartment cosmetic and makeup organizer featuring a slanted ergonomic design. It tapers from 80 mm in the back for tall brushes and bottles down to 40 mm in the front for easy access to lipsticks, creams, and small…
This slanted trench is ideal for storing wide flat objects (keyboards, notebooks, etc.) in your Gridfinity storage. PLA No Supports
A simple sprue wich you move to your model just so it touches it. If it doesnt fit you can easily cut and resize it to fit your model. I tested it on multiple large prints oriented at about 45 degrees and it saved me so much support…
Remix of the slanted pen attachment from Rvdk. Added two rows for six pens in total. Also slightly altered the other openings. Happy printing!
Keep your socks together! This version is thinner at the front and thick in the middle, just like the original SockStar improving the easy of use. I printed it in ASA for best heat resistance.
Upgrade your workspace with this pen/pencil holder, featuring a distinct lattice slanted wave design. This stylish organizer is optimized for 3D printing and ideal for storing pens, markers, brushes, or highlighters. Designed for both…
Was upgrading pickups on my 2006 Schecter Blackjack and snapped one of the pickup rings. I made these based on the dimension given in the last picture. I followed the slant, meaning the neck pickup ring starts at 9mm and slants to 7.3mm…
Two barrel-shaped cups: a non-rotating version with vertical ripple wave ribs, and a second style with a gentle slanted twist. Both have a rounded silhouette and a beaded rim. Use them as pen pots, makeup/brush holders, or small vanity…
Self Explanatory. Now is compatible with this part and similar picatinny extenders.
Here's a simple flash drive holder. I slanted it for better card viewing. Category: Electronics
an holder for nails to be nailed slanted, oblique Fusion360 project available
Slanted Sine Wave using a twisted surface sweep projection
A slanted coaster in a shape of grille for use under a larger cup in Catler Porto capsule coffe machine. Compatible with: ES 700 PORTO BG ES 701 PORTO BH ES 702 PORTO W ES 703 PORTO B ES 720 PORTO W ES 721 PORTO B The coaster has a slight…
Bins I designed to hold my A6 photo prints! Also has a version with dividers I made for packaging of various sizes. The ones I printed are a bit shorter than the original model, as my filament ran out just before the end of the print and…
The filament guide by Tiwa346 with different screw holes
Print, snap off support, done.
Use this to display your cars or transformers at an angle! I will add a way so you can have them stay in the middle of the display stand. Tolerances are tight! .1mm difference all around. This is split into pieces to save filament and time.
Overview This is a parametric OpenSCAD model for a slanted case designed to hold your filament swatches. The unique, angled slots allow for easy viewing and quick access to your filament samples, making it perfect for organizing and…
3rd soap holder I've made! This time, it's slanted with a focus on design. It also has a water shedder like my last model.
This is a remix of the very good "ADIMLab Control Box Front Panel" by FerretWorx." This remix adds the SD card slot; adds a flat front instead of ending at a point and makes the logo a little more pronounced along with some other minor…
Available in stl (inches or mm). It is based on my other design which is a vertical phone holder . It is slanted approximately 15° off the vertical. Designed to fit the Moto G4 Play. Hole pattern matches the Actobotics® hole pattern.…
Description A modern, heavy-duty speaker wall mount and shelf specifically designed for installation under 45-degree slanted ceiling / mansard walls . It features an integrated internal cable management routing channel to cleanly hide…
The narrow IKEA METOD pull-out cabinets are great, but their tapered (slanted) side walls make it impossible to store spice jars neatly. They constantly tip over or slide into the gaps. This modular system solves that problem while being…
Shard | Slanted Chamfered 7° Cradle for Logitech Craft Designed a clean, geometric 7° cradle for the Logitech Craft . This one goes for a sleek, slanted look with sharp corners keeping full access to the top crown dial. It uses a 2-piece…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
Use this to display your cars or transformers at an angle! I will add a way so you can have them stay in the middle of the display stand. Tolerances are tight! .1mm difference all around. This is split into pieces to save filament and time.
*** SEE Edit Below *** I wanted something different from designs I have seen to hold my sockets in my toolbox. So I made this slanted socket rack. It fits nicely in the shallow drawers of my toolbox. And the slanted design makes it easy…
Was upgrading pickups on my 2006 Schecter Blackjack and snapped one of the pickup rings. I made these based on the dimension given in the last picture. I followed the slant, meaning the neck pickup ring starts at 9mm and slants to 7.3mm…
Bins I designed to hold my A6 photo prints! Also has a version with dividers I made for packaging of various sizes. The ones I printed are a bit shorter than the original model, as my filament ran out just before the end of the print and…
Dimensions: External: 75x75x110 (mm) Internal: 70x70 Printed with pla, 15% infill, but less should be fine as well. Use variable layer height at quality setting to get the best slant.
The narrow IKEA METOD pull-out cabinets are great, but their tapered (slanted) side walls make it impossible to store spice jars neatly. They constantly tip over or slide into the gaps. This modular system solves that problem while being…
150mm wide by 75mm deep with 3 slanted bins. The design was inspired by https://www.printables.com/model/849953, however, there are three holes to facilitate attachment to a tile in the multiboard organization system using the big thread,…
A slanted coaster in a shape of grille for use under a larger cup in Catler Porto capsule coffe machine. Compatible with: ES 700 PORTO BG ES 701 PORTO BH ES 702 PORTO W ES 703 PORTO B ES 720 PORTO W ES 721 PORTO B The coaster has a slight…
Extra parts: 1x PC4-M6 tube connector 2x DIN 562 M3 square nut 2x DIN 912 M3x8 screw a bit of silicone caulk Notes: Use 6.5 mm drill bit for the center hole and 3.5 mm drill bit for the other two holes. Overfill the pocket around the…
secure method of hanging picture frames on a slanted wall. You will need 1 of each (Top, Right, Left). Secures onto 5mm thick screw with 8-15mm head, sticking out of the wall. mounts to the frame with 4mm thick screws that are 16-20mm long.
Exact Cards Used In Deck Holder - https://amzn.to/42tVK2C I do receive a small commission if you decide to purchase through this link I created this deck holder for games that require multiple decks like hand and foot, or uno. You can use…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
There are two variations of this model, one which is 1x3 Gridfinity units and can hold 3 pens / pencils, and one which is 2 units wide and can hold 6 of your favourite writing utensils. The slots for the pens are 11mm which I found to…
this adapter can adapt 120mm PC fan to 92mm CPU cooler fan mount. it is optimized for fan mounting clip for CPU cooler. print with material that has glass transition temperature higher than 80 deg c, like PETG, ABS.
Pen Holder inspired by my Slant Squared Modern Desk Light design on MakerWorld. https://makerworld.com/en/models/1702256-slant-squared-modern-desk-light#profileId-1805295 This design adds a nice modern touch to your work or home office…
A angled end cap for aluminum profile that is held in with a M4 screw
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Chopstick Holder with an elegant triangle slanted design. No supports needed!
Remixed to be able to mount it on a slanted (45 degree) wall. . Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.28 mm Infill: 10% Filament: Random PLA White Notes: Print it with back down and…
Dimensions: External: 75x75x110 (mm) Internal: 70x70 Printed with pla, 15% infill, but less should be fine as well. Use variable layer height at quality setting to get the best slant.
A two-part cutlery organizer designed to fit snugly into a kitchen drawer. Overall dimensions: 461 mm x 240 mm x 112 mm (front and back modules sit flush together with no gap) Insert width: 197 mm at the base, widening to 240 mm at the…
A two-part cutlery organizer designed to fit snugly into a kitchen drawer. Overall dimensions: 461 mm x 240 mm x 112 mm (front and back modules sit flush together with no gap) Insert width: 197 mm at the base, widening to 240 mm at the…
Avant-Garde Design & Modern Geometry Bring a breath of contemporary art into your interior with this unique set of geometric vases. Each piece features a distinctive low-poly form, composed of precisely connected triangular and…
I wanted a convenient place to store my allen keys, specifically a clip for the top part of the frame. This was the only design that fit my printer. However, my printer only came with 4 allen keys, not 6, so I removed two of the slots. I…
Holds most 1 oz coins. Can hold up to 10., silver coin holder with case "not perfected"
Remix of Glasses Holder by Nan Design Studio with a sheared design. I have no modeling experience so the geometry is sloppy
So that the fan doesn't run so often on the MacBook 15", I designed and printed out this slanted pad with ventilation slots. Since then, the fan starts much less often. Since it was too big for my MK3S+ to print it all at once, I printed…
Prints without supports. STL can be broken apart if you'd like to print in multi-colors. The finished puzzle is slanted, so the parts are not as easy to fit as you think.
Slanted Magnetic Knife Block - Single and Multi-Material Holds up to 8" knives (on top layer). Uses 10 10mmx2mm magnets like these . Printing Requires a larger print bed (mk3s works). If printing at .2mm, pauses at the following for…
