Elegoo Neptune 3 & 4 Pro/Plus/Max Ball Bearing Spool Holder lowering 20mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for the Elegoo Neptune 3 Pro family.
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 562
- Wydruki
- 3
- Wyświetlenia
- 4288
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Spool Holder for your Elegoo Neptune 3 Pro (Plus, Max, and others)
Features
Ball bearing smooth feeding
Lowers the machine by 2cm, making it fit into most small tents for 3D printers (e.g. Creality brand) with the spool
Print two and mount two spool holders, one for each side.
Hardware
2x 608ZZ ball bearing (skateboard bearings) per side
1x M8x20mm (1mm thread pitch) bolt per side
Print Instructions
There is an image with the suggested orientations and the print settings I used.
Assembly
Make a complete cylinder by joining together two half-cylinders with an hexagonal pin
Add a 608ZZ bearing to each end of the cylinder
Drop the cylinder on the main body
Use the M8x20mm bolt to attach the main body to a Bolt-Bolt part (after that, you can't take out the cylinder)
Attach the completed holder to your printer
Give this model a like ;-)