Simucube PSU holding brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets are designed to hold the 300W Simucube 2 Pro PSU. Designed to be fastened with screws to a flat surface.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 667
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Brackets are designed to hold the 230V 300W Simucube 2 Pro PSU. Designed to be fastened with screws to a flat surface. I use them to mount my PSU to a wooden simrig. The model's height is designed to slightly compress the foam rubber feet that are on the PSU to ensure a snug fit without rattling noise. Be aware of this when mounting it on anything other than a flat surface.
There are 2 different brackets to accomodate different cables.
I printed them upside-down with PETG on a prusa i3 MK3S+ with PEI printbed. No supports are needed this way.
Since I printed them I made a small adjustment since the 48V cable did not fit through it's opening due to the ferrite core of the cable being too big. I filed away a bit of material on the print but since I updated the model this should not be necessary.
Not a very common item but maybe somebody will benefit from it.